| Product Name | Plastic Grass Paver |
| Model | GPP-38 | GPP-48 | GPP-68 |
| Size(mm) | 410×390×38 | 410×390×48 | 410×390×68 |
| 500×500×68 | 500×500×38 |
| Pressure Strength | 160ton/sqm-250ton/sqm |
| Material | HDPE ( high-density polyethylene ) |
| Product Type | Virign material and Recycled Material |
| Durability | at least 4 years in neutral ground of 4 < pH < 9 |
| Working Temperature | Apply in temperature of -10ºC to 50ºC |
| Anti HCL | 30%x24h, no visible change |
| Thermal Aging | 70ICx24h, no visible change |
| Anti UV | UPE>30 T(UVA)AV<5%, qualified |
Grass Grid Property
1. Environmental protection, non-toxic, no pollution.
2. Impact resistance, anti-ageing,
anti-UV, good resistance to corrosion resistance.
3. Flame retardant, plant grass function. 4. Pressure resistance, abrasion resistance, impact resistance, ageing resistance, corrosion resistance.
5. Safe and stable, recyclable and pollution-free.
6. Green environmental protection, extremely light, fast installation, Labour-saving, shorten the construction cycle.
Grass Grid Product Features
-Impact resistant, anti-aging, anti-UV
-Abrasion and corrosion resistance, good flame retardancy, strong grass planting function
-Reduce ground reflection, reduce ground heat radiation
-Reduce the ground acoustic transmission, reduce noise pollution
-Reduces dust and purifies air
-Natural seepage of rainwater, no loss of soil, no waterlogging
-Natural circulation of water, air and fertilizer, no soil caking
-Increases green area
-Simple construction and light weight
-Free combination and disassembly, reusable
-Can withstand a weight of over 300T/m2
Company Profile
Construction Method
1. The slope shall be laid in order from top to bottom. Don't pull it too tight.
2. Tow adjacent longitudinal joints should not be in a horizontal line, should bestaggered more than 1m each other.
3. Longitudinal joints should be more than 1.50m away from the dam foot and bending foot, and should be located on the plane.
4. When the slope is laid, the direction of spreading film should be basically parallel to the slope line.
5. The construction, first of all to use small diameter sand or clay levelingbase, and then laid the geomembrane. The geomembrane should not be stretched too tight, and the part of the soil bured at both ends is corrugated. A transitional layer of about 10cm is laid on the geomembrane with sand or clay.
Shandong Geomembrane New Materials Co., Ltd. It stands out as an exceptional factory in the field of geosynthetic materials.We specialize in the entire industrial chain operation of new geosynthetic materials such as geomembranes, composite geomembranes, geotextiles, geocells, threedimensional composite drainage nets, bentonite waterproof blankets, integrating production, R&D, and sales. Equipped with advanced production equipment and a professional technical team, ensuring efficient and stable supply of high-quality products.
With an unwavering pursuit of scientific and technological innovation, we continuously invest in R&D resources and have established long-term partnerships with well-known scientific research institutions, continuously introducing new products with outstanding performance. The company strictly adheres to the ISO9001 quality, environmental, and occupational health and safety management system certification standards. Every link, from raw material procurement to product delivery, is strictly controlled to ensure that products meet international standards.
FAQ Q: Can you send samples?
A: Yes, we are very happy to provide you with free samples to check the quality of our products.
Q: Are you a manufacturer or a trading company?
A: Our company located in Hefei, Anhui Province, with a registered capital of 52 million yuan. It is a professional manufacturer of geomembrane, geotextile, geogrid and other products. So we have the competitive price with best quality.
Q: Can you produce the product according to customers' requirements?
A: Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q: How long is the delivery time?
A: General within 3-7 days after received the deposit.
Q: How to control product quality?
A: Our factory adopts lean management,products from the beginning to the end of the production process have strict quality control. All products must be strictly tested before packing and shipping.
